hello everyone :D
↧
new member
↧
radio code
hi not sure if i am posting in the right place but i will try anyway
i am trying to unlock my phillips car stero
model is 22dc722/65z
serial number is PHAPCFW9080371
can someone please help the car is a peugeot 406 1998
many thanks
i am trying to unlock my phillips car stero
model is 22dc722/65z
serial number is PHAPCFW9080371
can someone please help the car is a peugeot 406 1998
many thanks
↧
↧
Samsung Note 3 N900 Baseband unknown Imei Null
Plz.. I need isp sam note n900
↧
Mbz e-420 radio code
Hello,
I need radio code for my Mercedes Benz E-420 radio.
VIN: WDBJF72F8VA454865
RADIO MODEL: BE1692
SERIAL NUMBER: V1170374
Can someone please help me get the code??
thank you...:)
I need radio code for my Mercedes Benz E-420 radio.
VIN: WDBJF72F8VA454865
RADIO MODEL: BE1692
SERIAL NUMBER: V1170374
Can someone please help me get the code??
thank you...:)
↧
Becker Grand Prix Electronic code please
Hello can someone please help me out with a code for my
Becker Grand Prix Electronic
serial 6900084
Becker Grand Prix Electronic
serial 6900084
↧
↧
htc m7 dead boot err
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931]
Restarting target (nRST Low then High)...OK
Connecting to the dead body...OK
Detected dead body ID: 0x207150E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC OneM7 (PN0710000) V1.0.4926.46931]
Restarting target (nRST Low then High)...OK
Connecting to the dead body...OK
Detected dead body ID: 0x207150E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.
↧
Need emmc pinout Moto G xt1039
Hi guys
I have a Moto G xt1039 with water damage. I Need emmc pinout.
thanks for any help
![]()
![]()
I have a Moto G xt1039 with water damage. I Need emmc pinout.
thanks for any help
↧
Help .May car cd cood.
Poslano sa mog SM-J700H koristeći Tapatalk
↧
Riff Box 2 JTAG Connection Issue
I am attempting to connect to an older Samsung M820 cell phone. The laptop is running Windows 7 - 64bit. Using a Riff Box 1 with the JTAG TCK speed set to RTCK Set to Max, I have no problems connecting using the latest RIFF Manager software.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.62
Selected Resurrector: [Samsung M820 V1.00]
Connecting to the dead body...OK
Detected dead body ID: 0x503E00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0C01000000000000000000001FFFFFFF
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Reading FLASH1 address space from 0x000000000000 to 0x00001FFFFFFF
When I use a Riff Box 2 using the same laptop computer and RIFF Manager settings, it is unable to connect and get a dead body ID. See included image.
However, if I only change the JTAG TCK speed set to RTCK, Sample set to 12MHz, the highest setting. I am able to connect and download without a problem.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX2), JTAG Manager Version: 1.62
Selected Resurrector: [Samsung M820 V1.00]
Connecting to the dead body...OK
Detected dead body ID: 0x503E00E1 - CORRECT!
Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]
Settings Code: 0x0C01001100000000000000001FFFFFFF
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Reading FLASH1 address space from 0x000000000000 to 0x00001FFFFFFF
I am noticing this issue a lot on the older phones where I need to force the connection speed when using the Riff box 2.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.62
Selected Resurrector: [Samsung M820 V1.00]
Connecting to the dead body...OK
Detected dead body ID: 0x503E00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0C01000000000000000000001FFFFFFF
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Reading FLASH1 address space from 0x000000000000 to 0x00001FFFFFFF
When I use a Riff Box 2 using the same laptop computer and RIFF Manager settings, it is unable to connect and get a dead body ID. See included image.
However, if I only change the JTAG TCK speed set to RTCK, Sample set to 12MHz, the highest setting. I am able to connect and download without a problem.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX2), JTAG Manager Version: 1.62
Selected Resurrector: [Samsung M820 V1.00]
Connecting to the dead body...OK
Detected dead body ID: 0x503E00E1 - CORRECT!
Set I/O Voltage reads as 2.62V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]
Settings Code: 0x0C01001100000000000000001FFFFFFF
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Reading FLASH1 address space from 0x000000000000 to 0x00001FFFFFFF
I am noticing this issue a lot on the older phones where I need to force the connection speed when using the Riff box 2.
↧
↧
Bmw bavaria c professional rds
Bought on ebay but no code for it.
Anybody who knows it or can get it.
BE2455W5006094
776 1045.032-284
BE1801 C 7761852
774 1006.071-288 b
1801 1082.396-285 b
Regards bilkert35
Anybody who knows it or can get it.
BE2455W5006094
776 1045.032-284
BE1801 C 7761852
774 1006.071-288 b
1801 1082.396-285 b
Regards bilkert35
↧
Seat Ibiza Alana radio code
Greetings,
need code for seat ibiza '05 alana radio code
sez2z9e3049349
Tnx
need code for seat ibiza '05 alana radio code
sez2z9e3049349
Tnx
↧
Freelander 1 FL5 Radio Code
Hi All.
Martin here and wonder if anyone can help with the unlock code for an 04 Freelander 1 FL5 6XCD Changer / Radio.
Had a new clutch fitted yesterday (£££ Ouch!) and the garage had to disconnect the battery so the inevitable happened and the radio is asking for the code .... I seem to have every bit of paper / manual ever associated with the car except the radio code :mad:
Model is Visteon, FL5 CDX6 Europe 4CFF 18C838-BB
Serial Number: ODJM091397
Can anyone help with the code or recommend a safe / reliable / cheap! online service for the code.
Many thanks.
Martin
Martin here and wonder if anyone can help with the unlock code for an 04 Freelander 1 FL5 6XCD Changer / Radio.
Had a new clutch fitted yesterday (£££ Ouch!) and the garage had to disconnect the battery so the inevitable happened and the radio is asking for the code .... I seem to have every bit of paper / manual ever associated with the car except the radio code :mad:
Model is Visteon, FL5 CDX6 Europe 4CFF 18C838-BB
Serial Number: ODJM091397
Can anyone help with the code or recommend a safe / reliable / cheap! online service for the code.
Many thanks.
Martin
↧
riff2 isp samsung-t555
Hi! Here is sample how to dump subj via isp connect with RIFFBox v2:
↧
↧
Land roover radio car code
Hello
I need code for my radio car land rover
Cl model No: CE-6H3205LR-02
Serial No:0009071
Part No: XQE500350
7H12 70447 BB
Manufacturted date :07/10/09
Assembled in Mexico 982-2051-33
Thanks
I need code for my radio car land rover
Cl model No: CE-6H3205LR-02
Serial No:0009071
Part No: XQE500350
7H12 70447 BB
Manufacturted date :07/10/09
Assembled in Mexico 982-2051-33
Thanks
↧
riff2 isp samsung-t555
--------------------
↧
Blaupunkt 420 Unlock Code, Please help.
Hi there,
I need the unlock code for a Blaupunkt 420
92057948
BP8390Y2830681
Any help would be greatly appreciated.
Thanks.
I need the unlock code for a Blaupunkt 420
92057948
BP8390Y2830681
Any help would be greatly appreciated.
Thanks.
↧
Radio code for ph7850(bmw business rds radio)
Hello !
I need the Code for my Car Radio : BMW Business RDS Philips
65.12 - 8 374 583
PH7850V1234478
Greets
I need the Code for my Car Radio : BMW Business RDS Philips
65.12 - 8 374 583
PH7850V1234478
Greets
↧
↧
HTC Desire S - contacts ?
Need help with extracting contacts from HTC Desire S
Emmc learned - here is the log:
Proofread full has a size of 2.1 Gb.
But R-studio can't find the system files..
tell me what I'm doing wrong ?
Emmc learned - here is the log:
Code:
eMMC Device Information ----------EMMC CID : 1501004D344732444503491B0B44BEA2
EMMC CSD : D02701320F5903FFF6DBFFE78A404056
Изготовитель eMMC: ID: 0015 , OEM ID: 0100
EMMC Date: 11/2011 Rev.0x3
EMMC NAME: M4G2DE , S/N: 1226509124
EMMC NAME (HEX): 4D344732444500
EMMC ROM1 (Main User Data) Capacity: 2152 MB
EMMC ROM2 (Boot Раздел 1) Емкость: 512 kB
EMMC ROM3 (Boot Раздел 2) Емкость: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00002000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: M4G2DE_1226509124_20160908_2345.extcsd
Searching for partition tables...
Detected MBR...
Disk Signature: 00000000
MMCBLK0P0 Type: Unknown:0x4d Start: 200 Len: 7D000
MMCBLK0P1 Type: Unknown:0x45 Start: 7D200 Len: 10000
MMCBLK0P2 Type: Unknown:0x46 Start: 8D200 Len: 465000
MMCBLK0P3 Type: Extended Start: 4F2200 Len: 8630DC00
Warning: Extended Partition Detected - this feature not tested
MMCBLK0P4 Type: Unknown:0x49 Start: 4F2400 Len: 1D4C000
MMCBLK0P5 Type: Unknown:0x50 Start: 223E600 Len: C35000But R-studio can't find the system files..
tell me what I'm doing wrong ?
↧
New: Lg h910 v20 lte-a / h915
Expected Release Date: September, 2016
Successor of LG H900 V10 LTE-A
78.1 x 159.7 x 7.6 mm, 174 g, Google Android 7.0 (Nougat) ...
See Detailed Specs
More...
Successor of LG H900 V10 LTE-A
78.1 x 159.7 x 7.6 mm, 174 g, Google Android 7.0 (Nougat) ...
See Detailed Specs
More...
↧
FUTURE: Samsung SM-N930J Galaxy Note 7 TD-LTE SCV34
Expected Release Date: December, 2016
73.9 x 153.5 x 7.9 mm, 169 g, Google Android 6.0.1 (Marshmallow) ...
See Detailed Specs
More...
73.9 x 153.5 x 7.9 mm, 169 g, Google Android 6.0.1 (Marshmallow) ...
See Detailed Specs
More...
↧